Home

WiFi Repeater 192.168.10.1 Admin Setup

With the rapid change of technology, the lives of people have become increasingly dependent on the Internet. To access the high-speed of the Internet, all you need to do is to set up the WiFi Router. But if you will face any issue in the network coverage in some areas of your home or office. Then you can set up the WiFi Repeater or Extender. These devices are used to extend the strength of the WiFi Signals. In case you have any queries related to WiFI repeater. then reach the technical experts for help. For a better understanding of the WiFi Repeater Setup, you can refer to the device manual.

IP addresses such as 192.168.1.1 and 192.168.0.1 are generally called as Default Gateway IP Addresses. There are so many people who are still unaware of the Router IP address. However, you will easily get the router’s IP address and after that, you can make the required settings to the router. With this, you can also configure everything whatever you want.


Step By Step Guide To Login To 192.168.10.1 It is easy to perform the log-in to the admin interface of the router if you are already aware about the router IP address. The IP Address 192.168.10.1 is the default gateway IP for the router by using which you can log in to the admin interface of the router. Follow the step by step guide to login to 192.168.10.1:

• The first step is to connect with the router’s network either wirelessly or by using an Ethernet cable.

• Once you will get connected to the network, then all you need to do is to open the new web browser on the PC.

• Now in the address bar, simply type in the 192.168.10.1 or http://192.168.10.1 address. After that, you can tap on the Enter button.

• You will be able to see the login page appear on the screen. It will ask you to enter the login username & password to continue.

• Then you must find the right login username & password on the manual guide of the router.

• After that, enter the login username and password to proceed with the login.

• Once you have successfully got logged in, then you will be able to manage all the settings from the admin interface.

Note: Make sure that you have entered the valid IP Address, otherwise you will not be able to access the Wi-Fi Repeater Login page.

Quick Guide to Change Network Name & Password Via using the 192.168.10.1 It is always recommended to change the SSID and password of the wireless network with the help of the admin interface of the router. Once you will get a login to the admin interface, then you can change the SSID & password. The process is quite simple & easy; it will usually take a few minutes. Follow the steps given below to change the network name and password:

• Once you will be logged in, then navigate to Home and then tap on the Wireless. Choose the Security option.

•You can now scroll down and then look for Network Name/SSID.

• Carefully enter the new SSID in the given field.

• If you want to change the password, then choose the encryption protocol for the wireless network.

• Enter the new password in the WPA Passphrase field.

• Finally, click on ‘Apply’ to confirm the new changes.

The discussion which is made above regarding the WiFi Repeater 192.168.10.1 Admin Setup, is easy to understand and implement. After setting up the WiFi Repeater, you can access the internet in all the corners of your home.